Skip to content
Get Estimate

How Much Does a Pool Cost in Frisco, TX?

Everyone wants one number. The honest answer is that a pool price is really a stack of smaller prices, and the stack looks different in every yard. The shell is the part people shop. The deck, fence, equipment, soil work and permits are the parts that sneak up.

Cost guides report in-ground pools in the Dallas area at about $57,000 to $107,000, with an average near $81,000, while a typical pool remodel nationally runs about $5,400 to $14,900. Your real number comes from a builder's on-site look, because soil, access, size and features change everything.

What drives the price

Pool type

Angi's national ranges put vinyl at $40,000 to $75,000, fiberglass at $55,000 to $100,000 and concrete at $65,000 to $120,000. Gunite costs the most up front, and it also costs the most to look after each year.

Size and shape

Angi reports $90 to $250 per square foot for in-ground pools, with custom sizes landing toward the top of that range. Curves, ledges, beach entries and raised walls all add labor.

Your soil and slope

Angi's Dallas guide says local soil runs from expansive clay to shallow limestone and chalk. Clay may need stabilization after excavation, and rock makes digging slower and more expensive. A sloped yard may need retaining walls, and Frisco wants engineer drawings for walls over 36 inches tall.

Distance from the house

Frisco's 1:1 rule ties pool depth to how far the beam must sit from the foundation. Crowd that line and you'll need an engineer's letter, which adds cost and time.

Everything around the water

Decks, fences, heaters, lighting, a spa, an outdoor kitchen. These are often priced separately, and they're where budgets go sideways.

Published cost ranges

These are ranges from cost guides and the City of Frisco, not quotes.

ItemTypical range reportedSource
---
In-ground pool, Dallas area$57,120 to $106,734Angi, Dallas guide
In-ground pool, Texas$51,900 to $100,700Angi, national guide
Concrete (gunite) pool$65,000 to $120,000Angi, national guide
Fiberglass pool$55,000 to $100,000Angi, national guide
Vinyl liner pool$40,000 to $75,000Angi, national guide
Pool fence$1,500 to $10,000Angi, national guide
Pool decking$3,000 to $12,000Angi, national guide
Pool heater$1,830 to $4,210Angi, national guide
Frisco permit, in-ground pool$200City of Frisco
Frisco permit, in-ground pool and spa$275City of Frisco
Pool remodel$5,416 to $14,931Angi, pool remodel guide
Resurfacing$6,000 to $15,000Angi, resurfacing guide

Frisco's fees come from the city's residential pool submittal checklist, which also lists separate fees for plumbing, electrical, demolition and deck-only permits. Note that the city says re-inspection fees must be paid before another inspection happens, so a failed inspection can cost money as well as time.

New build or remodel?

If you already have a pool, a remodel is usually far cheaper than starting over. Resurfacing, new tile and coping, and an equipment upgrade can make an old pool feel new. A remodel can also change the pool itself: Angi lists deep to shallow conversions at $4,000 to $7,000 and expanding or reshaping at $20,000 to $100,000. When the reshaping number starts to look like a new pool, price both. See pool remodeling for what a remodel covers.

Don't forget the yearly cost

The build is one number. Owning it is another. Angi puts annual upkeep at $1,100 to $1,700 for vinyl, $500 to $1,500 for fiberglass and $2,700 to $4,000 for concrete. Its Dallas guide puts local maintenance at about $150 to $400 a month. Plaster finishes need resurfacing every so often too.

How quotes work, and how to compare them

A pro visits, measures, checks the soil and access, and asks how you'll use the pool. Then you get a written quote. Getting more than one is smart, but only if you compare the same work. Here's how:

  • Line up the scope. Does each quote include excavation, haul-off, steel, plumbing, equipment, finish, deck, fence, electrical and startup?
  • Check the allowances. A low quote with small allowances for tile or decking can end up the expensive one.
  • Ask about soil. What happens, and what does it cost, if the crew hits rock or needs to stabilize clay?
  • Confirm permits. Who pulls them, and who pays for re-inspections?
  • Look at the payment schedule. Payments should follow finished stages, not run far ahead of the work.
  • Ask about upkeep. A cheaper pool type may cost more each year.

If you're still choosing a direction, start with custom pools, small yard and plunge pools or luxury pools and outdoor living. Send the form when you have a rough budget in mind, and a builder can price the real yard. Tilewater Pools passes your request to an independent local pro, who visits and quotes. We don't set prices or take payments for the work.

Pool questions, answered

How much does a pool permit cost in Frisco?

The city's residential checklist lists $200 for an in-ground pool permit and $275 for an in-ground pool and spa. Separate plumbing, electrical, demolition and deck-only permits have their own fees.

Why do Dallas-area pools cost more than the national average?

Angi's Dallas guide says local pool costs run higher than the national average, and notes that local soil, from expansive clay to limestone, can add excavation and stabilization work.

What does a pool cost per year to maintain?

Angi's national guide lists about $500 to $1,500 a year for fiberglass, $1,100 to $1,700 for vinyl and $2,700 to $4,000 for concrete. Heating, repairs and resurfacing come on top of that.

Is a cheaper pool quote always the better deal?

No. A low quote may leave out the deck, fence or electrical, or use small allowances. Compare line by line and ask what's excluded before deciding.

Planning a pool for next summer?

Design, permits and the build take time in Collin County. Send your idea now and a local builder will reach out.

Get Estimate