Skip to content
Get Estimate

Custom Pool Builders in Frisco

A custom pool starts with a question most catalogs skip: how do you actually want to use this water? Laps at 6 a.m., a toddler splashing on a shallow shelf, ten teenagers doing cannonballs, or two adults with a drink after work all point to different pools.

A custom pool in Frisco usually means gunite, which is concrete sprayed over a steel frame and shaped on site. You choose the shape, depth, steps, ledges and finish instead of picking from a mold. Cost guides report concrete pools at about $65,000 to $120,000 nationally, and your real price comes from a builder's on-site look.

Who a custom pool makes sense for

Custom is worth it when a standard shape would waste your yard or miss how you live. It fits people who:

  • Have an odd lot, a curve in the back fence or a slope that a rectangle fights.
  • Want a sun shelf for lounge chairs in a few inches of water. Angi's Dallas guide puts a tanning ledge at $5,000 to $10,000.
  • Plan a built-in spa, a waterfall or a raised wall with a spillway. See spas and water features.
  • Want the pool to line up with a patio, a covered porch or an outdoor kitchen. That's the world of luxury pools and outdoor living.

Signs a standard pool won't cut it

You keep sketching shapes no catalog sells. You want a deep end for diving and a long shallow area for kids. You need the pool tucked close to the house, which in Frisco brings the 1:1 foundation rule into play. Or you just want a finish and tile color that's yours.

What's involved in a custom build

Here's how the work usually runs, with Frisco's inspection steps built in:

  1. Design. The builder measures the yard, notes drainage and utilities, and drafts a plan with a cross-section and equipment layout.
  2. Permit package. Frisco's checklist asks for a plot plan with setbacks, a dimensioned pool profile, equipment specs, fence location and gate swing, and a stamp from the utility service provider. Pools that sit closer to the house than their depth need an engineer's letter.
  3. Dig and steel. Excavation, then rebar. The city checks the steel, bonding and dual main drains at the belly steel inspection, and temporary safety fencing has to be up first.
  4. Shell, plumbing and deck. Gunite gets shot, gas and plumbing get tested, then deck steel gets inspected and the deck is poured.
  5. Fence, finish and final. Permanent fencing goes up before the pre-plaster inspection. Then the interior finish, water fill, startup and the final inspection.

Two Frisco rules shape custom designs more than people expect. The city says the shallow end can't be deeper than 4 feet of water, and any pool deeper than 5 feet needs a way to get out of the deep area. Ask your builder how the design handles both.

Fencing is its own design decision. Frisco's rules require a barrier at least 48 inches tall on the outside, set at least 20 inches from the water's edge, with self-closing, self-latching gates. You can read the full list in the city's residential pool and spa enclosure requirements.

What custom pools cost

These are published ranges, not quotes. Your builder prices your yard.

ItemTypical range reportedSource
---
Concrete (gunite) pool$65,000 to $120,000Angi, national guide
In-ground pool, Dallas area$57,120 to $106,734Angi, Dallas guide
Custom pool design, Dallas area$100,000 and upAngi, Dallas guide
Tanning ledge$5,000 to $10,000Angi, Dallas guide
Beach entry poolabout $55,000Angi, national guide
Infinity poolabout $80,000Angi, national guide
Concrete pool upkeep per year$2,700 to $4,000Angi, national guide

Note the upkeep line. Gunite costs more to look after than fiberglass, and the finish will need resurfacing someday. For the full picture, including fencing and decking, see our pool cost page.

Where custom budgets drift

Soil is a big one. Angi's Dallas guide notes local soil ranges from expansive clay to limestone and chalk. Clay may need stabilization, and rock slows the dig. Retaining walls are another: Frisco wants engineer drawings for walls and structures over 36 inches tall. Then come the "while we're at it" add-ons. Fine, as long as they're on paper before you sign.

What to ask the builder

  • Who pulls the permit, and who schedules each city inspection?
  • How will you handle the 1:1 distance from my foundation? Will we need an engineer?
  • What does the quote include: haul-off, deck, fence, equipment, startup, first chemicals?
  • Who does the electrical work, and are they licensed by the state?
  • What interior finish do you suggest, and how long does it usually last?
  • How do you handle clay or rock found during the dig?
  • Can I see a pool you built nearby and talk to that homeowner?

When you have your list of must-haves, use the form to request an estimate. Tilewater Pools passes your request to an independent local builder, who does the visit and the quote.

Pool questions, answered

What makes a pool custom instead of standard?

A custom pool is designed for your yard and built on site, usually in gunite. You choose the shape, depth, steps, ledges and finish. A standard pool uses a preset shape, like a fiberglass shell.

Can a custom pool sit close to my house in Frisco?

It can, within limits. Frisco ties distance to depth, so a 6-foot-deep pool needs its beam at least 6 feet from the foundation unless an engineer's stamped letter comes with the plans.

Do I need an engineer for a custom pool?

Sometimes. Frisco requires an engineer letter when a pool encroaches on the 1:1 foundation ratio, and engineer drawings for retaining walls or structures over 36 inches tall.

Is a custom gunite pool worth the higher price?

It is if a standard shape would waste space or miss what you want. If a fiberglass shape fits your yard and wish list, it may cost less to build and maintain.

Planning a pool for next summer?

Design, permits and the build take time in Collin County. Send your idea now and a local builder will reach out.

Get Estimate