Skip to content
Get Estimate

Pool Remodeling and Resurfacing in Frisco

Lots of people buy a house with a pool that was someone else's idea. The shape is fine, but the plaster scratches feet, the tile line is stained and the equipment hums like it's tired. You don't always need a new pool. Sometimes you need the one you have to feel new.

Pool remodeling covers resurfacing the interior, replacing tile and coping, redoing the deck, upgrading equipment and changing the pool itself, like adding a ledge or making it shallower. Angi reports resurfacing at $6,000 to $15,000 and the average full remodel near $10,000, with your price set by a pro's on-site look.

Signs your pool is due

Angi's resurfacing guide lists the classic warning signs. If two or three of these sound familiar, it's time for a closer look:

  • Plaster that flakes or peels.
  • A rough surface that snags swimsuits or scrapes feet.
  • Stains or discoloration that brushing won't fix.
  • Cracks in the structure or rebound cracks in the steps.
  • Rust stains.
  • On fiberglass, a failing surface.

Some problems sit outside the water. Loose coping, a heaving deck, an old single-speed pump or lighting that hasn't worked in years are all fair game for a remodel. Angi notes plaster usually lasts 5 to 10 years, depending a lot on how well the water chemistry was kept.

What a remodel can include

Resurfacing

The pool is drained, the old surface is prepped, and a new finish goes on. Plaster is the budget option. Pebble aggregate costs more but Angi says it can last 20 years or more. Vinyl pools aren't resurfaced; the liner gets replaced instead.

Tile, coping and deck

Waterline tile and coping take a beating from sun and chemicals. Replacing them at the same time as resurfacing usually makes sense, since the pool is already drained.

Equipment

Variable-speed pumps, LED lights, heaters and saltwater systems. Angi lists saltwater conversion at $500 to $2,500. Electrical work here is licensed work: the Texas Department of Licensing and Regulation says pool electrical maintenance must be done by licensed electricians working under an electrical contractor, or by licensed residential appliance installers working for an installation contractor. Read the TDLR notice on pool electrical safety.

Changing the pool

Turning a deep diving pool into a shallow play pool, adding a sun shelf, or attaching a spa. These are bigger jobs. See spas and water features if a spa is on your list.

How a remodel usually runs

  1. Inspection. The pro checks the surface, structure, tile, coping, plumbing and equipment, and looks for leaks.
  2. Scope and quote. You get a written list of what's being fixed, replaced or upgraded.
  3. Permits. Frisco's residential pool fee schedule lists separate permits for plumbing, electrical, demolition and deck-only work, so ask which apply to your job.
  4. Drain and prep. The pool is drained, repairs are made and the surface is prepped.
  5. Finish and refill. New surface, tile and coping, then refill, startup and water balancing.

Angi says resurfacing takes about 5 to 7 days for most pools, while a typical full remodel runs four to eight weeks.

What pool remodeling costs

Published ranges, not quotes:

ItemTypical range reportedSource
---
Pool remodel, most homeowners$5,416 to $14,931Angi, pool remodel guide
Resurfacing$6,000 to $15,000Angi, resurfacing guide
Drain, clean and refill before resurfacing$425 to $475Angi, resurfacing guide
Coping replacement$30 to $50 per linear footAngi, pool remodel guide
Pool deck$2,250 to $12,000Angi, pool remodel guide
Deep to shallow conversion$4,000 to $7,000Angi, pool remodel guide
Expanding or reshaping$20,000 to $100,000Angi, pool remodel guide

Want to compare that against a new build? Our pool cost page covers both. If the remodel list keeps growing, a fresh custom pool design may be worth pricing too.

What to ask the pro

  • What's causing the damage, and will the new finish fix the cause or just cover it?
  • Which finish do you suggest for my pool, and how long does it usually last?
  • Will you pressure test the plumbing before resurfacing?
  • Is tile and coping included, or priced separately?
  • Who pulls permits, and do I need any for this scope?
  • Who does the electrical work, and are they licensed?
  • How should I care for the new surface in the first weeks?

Ready to get a pro's eyes on it? Use the form to request an estimate. Tilewater Pools passes your request to an independent local pro who handles the inspection and quote.

Pool questions, answered

How do I know if my pool needs resurfacing or just repairs?

Small chips or a few loose tiles can often be repaired. Widespread roughness, flaking, staining or cracking usually means the surface has worn out. A pro can tell the difference on site.

How long does pool plaster last?

Angi says a good plaster finish lasts about 5 to 10 years on average. Water chemistry plays a big role, so a well-balanced pool tends to keep its finish longer.

Can I make my deep pool shallower?

Often, yes. Angi lists deep to shallow conversions at about $4,000 to $7,000. A pro will check the structure, plumbing and drains first.

Is it worth remodeling an old pool instead of replacing it?

Usually, if the shell is sound. A remodel costs a fraction of a new build. If the shell has serious structural problems or you want a different pool, new may make more sense.

Planning a pool for next summer?

Design, permits and the build take time in Collin County. Send your idea now and a local builder will reach out.

Get Estimate