
Who this is for
This page fits two groups. People planning a new pool who want the spa and features designed in from day one, and people with a pool who want more from it. If you're starting from scratch, read custom pools too. If your pool also needs new plaster or tile, pair this with pool remodeling so the work happens while the pool is drained.
Signs a spa or feature makes sense
- Your pool sits unused from October to May.
- The backyard is loud from traffic or equipment, and you want something to soften it.
- The pool looks flat, with no focal point from the house.
- Someone in the house wants warm water after a workout.
Spa options
Built with a new pool
The cheapest time to add a spa is during the build. Angi says an in-ground spa built with the pool typically costs $5,000 to $15,000, and that homeowners often save $2,000 to $10,000 compared with adding one later. A raised spa with a spillover into the pool is a common layout.
Added to an existing pool
This means new excavation, plumbing and electrical. Angi lists in-ground spas at $5,000 to $25,000 and above-ground hot tubs at $2,000 to $18,000. It also breaks out hot tub wiring at $1,900 to $4,200 and plumbing at $350 to $2,000.
In Frisco, spas need a permit when they hold more than 24 inches of water, the same as pools. The city's pools and pool enclosures page explains when a pool construction permit and plan review are required.
Water feature options
Angi's waterfall guide breaks features down by type:
- Sheet fall. A smooth, wide sheet of water, often from a raised wall.
- Spillway. A narrow, controlled stream, often from a spa into the pool.
- Rock waterfall. Stacked stone with a natural cascade.
- Grotto. A cave-like space behind the water. Big, dramatic and pricey.
Frisco has a few rules worth knowing. Fountains need electrical and, where needed, plumbing permits. Fountains in the front yard need site location approval, and fountains can't go in the side yard.
How it gets built
- Design. The pro places the spa or feature with sight lines from the house, sun, wind and equipment in mind.
- Permit. Frisco's fee schedule lists a combined in-ground pool and spa permit for new builds and a separate spa permit for add-ons.
- Dig, steel and plumbing. New lines and pumps get run, and suction systems need dual main drains under the city's rules.
- Shell, stone or tile. The spa shell or feature wall goes up, along with any stone or tile work.
- Electrical, heat and startup. A licensed electrician connects pumps, heaters and lights, then the system is tested and the city does its inspections.
What spas and water features cost
Published ranges, not quotes:
| Item | Typical range reported | Source |
|---|---|---|
| - | - | - |
| Adding a hot tub to a pool | $2,000 to $25,000 (average $13,500) | Angi, add a hot tub guide |
| In-ground spa built with a new pool | $5,000 to $15,000 | Angi, add a hot tub guide |
| Hot tub wiring | $1,900 to $4,200 | Angi, add a hot tub guide |
| Pool waterfall, most projects | $4,000 to $20,000 | Angi, waterfall guide |
| Sheet fall | $2,000 to $6,000 | Angi, waterfall guide |
| Spillway | $1,500 to $5,000 | Angi, waterfall guide |
| Grotto | $10,000 to $30,000 | Angi, waterfall guide |
See the full pool cost breakdown for the pool side of the budget.
What to ask the builder
- Should the spa share the pool's equipment or have its own?
- How fast will the spa heat up, and what will heating cost me?
- Where will the feature's pump go, and how loud is it?
- Can the feature run on a timer or from my phone?
- Does adding a spa change my fence or permit plans?
- Who handles the electrical work, and are they licensed?
When you know what you want, use the form to request an estimate. Tilewater Pools passes your request to an independent local pro who does the visit and quote.
Areas we cover for spas and water features
Pool questions, answered
Is it cheaper to add a spa when the pool is built?
Usually. Angi says an in-ground spa built with a new pool typically costs $5,000 to $15,000, and homeowners often save $2,000 to $10,000 compared with adding one later.
Do I need a permit to add a spa in Frisco?
Frisco requires a pool construction permit for spas with more than 24 inches of water, and the city's fee schedule lists a separate spa permit. Your pro should confirm which permits your plan needs.
Can I put a fountain in my front yard in Frisco?
The city's checklist says front-yard fountains need site location approval, and fountains can't be placed in the side yard. Fountains also need electrical and, where needed, plumbing permits.
What's the difference between a sheet fall and a spillway?
A sheet fall sends a wide, smooth sheet of water into the pool, usually from a wall. A spillway is a narrower, controlled stream, often running from a raised spa into the pool.